Monel Tube
Monel Grade 400 and Grade K500
High quality Monel Tube Grade 400 and Grade K500
Looking For Monel Tube Grade 400 and Grade K500 With Customized Length? Our Standard Sizes Are Usually 3m And 6m In Length, But We Also Provide Additional Cutting Service
Monel 400, Alloy 400, Nickel 400, Nickelvac 400, Nicorros 400,
Monel Alloy nickel-copper alloy 400 (UNS N04400; W.Nr. 2.4360 and 2.4361) is a solid-solution alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments.
Alloy 400 is widely used in many fields, especially marine and chemical processing. Typical applications are valves and pumps; pump and propeller shafts; marine fixtures and fasteners; electrical and electronic components; springs; chemical processing equipment; gasoline and fresh water tanks; crude lidco limitedleum stills, process vessels and piping; boiler feed water heaters and other heat exchanges and deaerating heaters.
Specifications
MONEL alloy 400 is designated as UNS N04400 and Werkstoff Nr. 2.4360 and 2.4361. It is listed in NACE MR-01-75 for oil and gas service.
Plate, Sheet, and Strip: – BS3072NA13 (Sheet and Plate), BS3073NA13 (Strip), ASTM B 127, ASME SB 127 (Plate,Sheet, and Strip), SAE AMS 4544 (Sheet, Strip, and Plate),
DIN 17750 (Plate, Strip and Sheet), QQ-N-281 (Plate, Sheet, Strip, Bar, Rod, Wire, and Forgings)
Bar, Rod, Wire, and Forgings – BS3075NA13 (Wire), BS3076NA13 (Bar), ASTM B 164 (Rod, Bar, and Wire), ASTM B 564 (Forgings), ASME SB 164 (Rod, Bar, and Wire), ASME SB 564 (Forgings), AECMA PrEN 2305 (Wire for Rivets), SAE AMS 4675 (Bars and Forgings),SAE AMS 4730 (Wire), SAE AMS 4731 (Wire and Ribbon), DIN 17752 (Rod and Bar), DIN 17753 (Wire), DIN 17754 (Forgings), VdTÜV 263 (Sheet, Plate, Bar, and Tubing), QQ-N-281 (Plate, Sheet, Strip, Bar, Rod, Wire, and Forgings)
Pipe and Tube – BS3074NA13 (Tube), ASTM B 163 (Condenser and Heat Exchanger Tube), ASTM B 165 (Seamless Pipe and Tube), ASTM B 725 (Welded Pipe), ASTM B 730 (Welded Tube), ASTM B 751 (Welded Tube), ASTM B 775 (Welded Pipe), ASTM B 829 (Seamless Pipe and Tube), ASME SB 163 (Condenser and Heat Exchanger Tubes), ASME SB 165 (Seamless Pipe and Tube), ASME SB 725 (Welded Pipe), ASME SB 730 (Welded Tube), ASME SB 751 (Seamless and Welded Tube), ASME SB 775 (Seamless and Welded Pipe), ASME SB 829 (Seamless Pipe and Tube), SAE AMS 4574 (Seamless Tubing), DIN 17751 (Pipe and Tube), VdTÜV 263 (Sheet, Plate, Bar, and Tubing),
Welding Products – MONEL Filler Metal 60-AWS A5.14/ERNiCu-7; MONEL Welding Electrode 190-AWS A5.11/ENiCu-7.
Other Products – ASTM B 366, ASME SB 366 (Welded Fittings), SAE AMS 7233 (Rivets), DIN 17743 (Chemical Composition)
Chemical Composition
Nickel (plus Cobalt)……………………63.0 min.
Carbon……………………………………..0.3max.
Manganese………………………………..2.0 max.
Iron………………………………………….2.5max.
Sulfur……………………………………….0.024max.
Silicon………………………………………0.5max.
Copper………………………………………28.0 -34.0
Monel K-500, Alloy K-500, Nickel K-500,
Monel Alloy K-500 (UNS N05500/ W.Nr. 2.4375) is a nickel-copper alloy which combines the excellent corrosion resistance of MONEL alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. The thermal processing used to effect precipitation is commonly called age hardening or aging.
Typical applications for Monel Alloy K-500 products are chains and cables, fasteners and springs for marine service; pump and valve components for chemical processing; doctor blades and scrapers for pulp processing in paper production; oil well drill collars and instruments, pump shafts and impellers, non-magnetic housings, safety lifts and valves for oil and gas production; and sensors and other electronic components.
Specifications
MONEL alloy K-500 is designated as UNS N05500 and Werkstoff Nr. 2.4375. It is listed in NACE MR-01-75 for oil and gas service.
Plate, Sheet, and Strip: BS3072NA18 (Sheet and Plate), BS3073NA18 (Strip), QQ-N-286 (Plate, Sheet and Strip), DIN 17750 (Plate, Sheet and Strip), ISO 6208 (Plate, Sheet and Strip).
Bar, Rod, Wire, and Forgings: BS3075NA18 (Wire), BS3076NA18 (Rod and Bar), ASTM B 865 (Rod and Bar), DIN 17752 (Rod and Bar), DIN 17753 (Wire), DIN 17754
(Forgings), QQ-N-286 (Rod, Bar, Wire, and Forgings), SAE AMS 4676 (Rod and Bar), ASME Code Case 1192 (Rod and Bar), ISO 9723 (Bar), ISO 9724 (Wire), ISO
9725 (Forgings)
Pipe and Tube: BS3074NA18 (Seamless Pipe and Tube), DIN 17751 (Pipe and Tube)
Other Products – DIN 17743 (Chemical Composition), SAE AMS 4676 (Chemical Composition), QQ-N-286 (Chemical Composition)
Chemical Composition
Nickel (plus Cobalt)………………..63.0 min.
Carbon…………………………………..0.25max.
Manganese……………………………..1.5 max.
Iron………………………………………..2.0max.
Sulfur…………………………………….0.01max.
Silicon…………………………………….0.5max.
Copper…………………………………….27.0 -33.0
Aluminum………………………………..2.30 – 3.15
Titanium………………………………….0.35 – 0.85
ASTM B 165 Monel 400 Seamless Tube
Our range covers ASTM B 165 Monel 400 Seamless Tube, mild steel, stainless steel, cold drawn, structural, tubular, galvanized tubes, pipe, black pipe, and welded tube and pipe.
Widely regarded as being the leading supplier of ASTM B 165 Monel 400 Seamless Tube in UAE, Speciality Metals is the preferred choice for ASTM B 165 Monel 400 Seamless Tube in UAE, Saudi Arabia & Gulf countries.
Specification
Monel 400 | |
---|---|
Standards | Seamless |
ASTM | B 165 |
ASME | SB 165 |
ASTM B 730 Monel 400 Welded Tube
Our range covers ASTM B 730 Monel 400 Welded Tube, mild steel, stainless steel, cold drawn, structural, tubular, galvanized tubes, pipe, black pipe, and welded tube and pipe.
Widely regarded as being the leading supplier of ASTM B 730 Monel 400 Welded Tube in UAE, Speciality Metals is the preferred choice for ASTM B 730 Monel 400 Welded Tube in UAE, Saudi Arabia & Gulf countries.
Specification
Monel 400 | |
---|---|
Standards | Seamless |
ASTM | B 730 |
ASME | SB 730 |